DIY Folding Chair Makeover

If you have a lot of company over, it can be hard to accommodate everyone for seating.  Here is a great do it yourself tip to take a plain folding chair and turn it into a great furniture piece.  Keep reading to find out how to have enough chairs for everyone without breaking the bank.




MATERIALS //  folding chair, screwdriver, drop cloth, spray paint (2 cans per chair), fabric (20″ x 20″ piece per chair), scissors, staple gun and staples

STEPS  // 01 REMOVE EXISTING CUSHION  Using screwdriver, remove existing cushion from chair frame and set aside.

02 PAINT CHAIR //  In well-ventilated area, place chair on drop cloth and wipe down with damp towel. Using slow side-to-side movements, apply two thin coats of spray paint (refer to paint can instructions for drying time between coats). Let chair dry overnight. Tip: If chair is dark color or smooth finish, apply primer before painting with desired color.

03 RECOVER EXISTING CUSHION //  Lay out new fabric and place seat cushion face down. Trim fabric along edge of cushion (approximately 3″ from edge). Once cut, attach fabric using staple gun. Begin by stapling at the center of each side and then at the corners. Tip: If using a patterned fabric, be sure to align to your liking prior to stapling.

04 ASSEMBLE CHAIR //  Once chair is dry, assemble with new cushion and begin using!







For more information see MakeKind.